CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Thu Feb 26 21:11:19 CST 2004 r) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 2004.1.30.0 rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) CPU type 0x29007: 200MHz Total memory: 0x2000000 bytes (32MB) Total memory used by CFE: 0x80300000 - 0x8043E6F0 (1304304) Initialized Data: 0x80339120 - 0x8033AF20 (7680) BSS Area: 0x8033AF20 - 0x8033C6F0 (6096) Local Heap: 0x8033C6F0 - 0x8043C6F0 (1048576) Stack Area: 0x8043C6F0 - 0x8043E6F0 (8192) Text (code) segment: 0x80300000 - 0x80339120 (233760) Boot area (physical): 0x0043F000 - 0x0047F000 Relocation Factor: I:00000000 - D:00000000 Boot version: v3.1 The boot is CFE mac_init(): Find mac [00:0F:66:C5:2B:FE] in location 1 Nothing... Device eth0: hwaddr 00-0F-66-C5-2B-FE, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ..... 1503232 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029007 Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 4kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (root@honor) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #19 Thu Feb 26 21:05:57 CST 2004 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4712 rev 1 at 200 MHz Calibrating delay loop... 199.47 BogoMIPS Memory: 30712k/32768k available (1268k kernel code, 2056k reserved, 108k data, 68k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Disabled PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096 N_HDLC line discipline registered. PPP generic driver version 2.4.2 Flash device: 0x800000 at 0x1c000000 Physically mapped flash: cramfs filesystem found at block 875 Creating 4 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "pmon" 0x00040000-0x007e0000 : "linux" 0x000dafc8-0x007e0000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 0x007e0000-0x00800000 : "nvram" sflash: found no supported devices NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) ip_conntrack version 2.1 (256 buckets, 2048 max) - 344 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear All bugs added by David S. Miller VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 68k freed The chipset is BCM4712 Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Hit enter to continue...The boot is CFE Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 0 to IF -:eth0:- Added VLAN with VID == 1 to IF -:eth0:- WARNING: VLAN 1 does not work with many switches, consider another number if you have problems. Using /lib/modules/2.4.20/kernel/drivers/net/mac/writemac.o killall: httpd: no process killed name=[vlan0] lan_ifname=[br0] The chipset is BCM4712 =====> set br0 hwaddr to vlan0 name=[eth1] lan_ifname=[br0] The chipset is BCM4712 Write wireless mac Write wireless mac successfully br0: No child processes name=[eth2] lan_ifname=[br0] The chipset is BCM4712 eth2: No such device br0: No such device interface eth2 does not exist! name=[eth3] lan_ifname=[br0] The chipset is BCM4712 eth3: No such device br0: No such device interface eth3 does not exist! The chipset is BCM4712 The chipset is BCM4712 The chipset is BCM4712 The chipset is BCM4712 The boot is CFE tftp server started tftpd: standalone socket info, udhcp server (v0.9.8) started killall: upnp: no process killed Hit enter to continue...info, udhcp client (v0.9.8) started calling upnp_main Hit enter to continue...No interface specified. Quitting... No interface specified. Quitting... Hit enter to continue...info, Sending discover... (3) Hit enter to continue...info, Sending discover... (5) info, Sending discover... (7) info, Sending discover... (16) info, Sending discover... (18) info, Sending discover... (20) info, Sending discover... (29) info, Sending discover... (31) info, Sending discover... (33) info, Sending discover... (42) info, Sending discover... (44) info, Sending discover... (46) BusyBox v0.60.0 (2004.02.19-12:45+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. # # info, Sending discover... (55)